If you add just a weight to a load station, then by default it is treated as cargo by AvPlan EFB (even if that station is set up as a seat, for example). If you add names and weights, then the Passenger Manifest section of the Load Sheet print-out is filled out accordingly.
There are two methods of entering Passenger names and weights:
You can access the Passenger Manifest view by tapping the ‘Persons on Board’ text, or
Instead of tapping a green cell, first tap the white section in middle of the load station row.
Tapping this area will open up a second field directly below the original. In this new line (not the original row):
Enter the crew or passenger name first, then tap the return key.
Enter their weight in the green cell that is in the same row, then tap the return key.
If baggage is loaded onto a passenger seat and you need this to show correctly in the passenger manifest, tap on the pax symbol
to toggle it to a baggage symbol
The weight will then be entered in the load station, and the number in the Persons on Board field will be updated accordingly.
For subsequent crew and passengers, repeat the above process in an empty line in the appropriate load station line. Each time you enter a new passenger, both the Persons on Board field and the total weight for that load station will be updated accordingly.
